SEG Fabric Wall-Mounted Lightbox


+ Delivery and VAT


Our SEG Fabric Wall-Mounted Lightbox comes with:

  • Aluminium frame components
  • LED lights (already attached to the inside of the frame)
  • UK power cable with transformer and fitted plug
  • Allen key
  • 1 × dye-sublimation printed graphic

Our SEG Fabric Wall-Mounted Lightboxes are similar to their free-standing counterpart, in that they consist of an aluminium extrusion frame kit. The frame is 75mm thick for the standard and 60mm thick for the premium, and is fitted to the wall.

The fabric graphic, are printed using dye-sublimation onto our 310gsm backlit polyester. The dye-sublimation creates great image vibrancy and the graphics are then finished with a silicone edging (kedar). The graphics can then be slotted into the aluminium channel and tensioned around the edge.

The result is a beautifully-finished and seamless branding solution that is perfect for store displays or exhibitions. Replacement graphics are folded and sent via courier in a jiffy bag and are easily replaceable by existing ground staff, negating the need for skilled installers.

Each Lightbox graphic is finished with a nylon pull tab as standard. This aids easy removal of the graphic from the frame, which can be tricky without a pull tab. By default, this is affixed to an upper corner of the graphic to prevent children reaching it. Please let us know if you would prefer the pull tab to be located elsewhere or not supplied at all.

Power cable length is approximately 3m. If you require a different length, please enquire.

Please be aware that edge-lit Lightboxes work best with busy, vibrant designs. Plain and single-colour designs can highlight lighting anomalie

We do not provide a wall-mounting kit and the aluminium frame does not have any fixing points – this is because the fixing points can vary depending on the surface the frame is being fitted to. You will need to drill the frame in the desired location to create your own fixing points.

Additional information


1m x 2m, 2m x 2m, 2m x 3m


Once you have complete the checkout process, you will be redirected to a page where you can send us your design/design requirements. We will then send you a design proof via email for approval prior to us printing your order. Your order will not be processed until we have approved artwork.

You can give us your artwork in any of these formats: EPS, JPEG, PDF, AI, PSD.

Artwork Size and Resolutions: Artwork can be designed at full size @ 150dpi or half size @ 300 dpi.  

Please bear in mind we print all designs in CMYK, so colour shifts can occur when designs are supplied in RGB format.  

Please convert all fonts to outlines.  

We will match colours as close as possible but some print processes may result in slight colour changes. Colours will not always print exactly as they appear on your computer monitor so please let us know if you have specific colour shades.  

We recommend not placing any critical artwork/text within 5cms of any edge. Bleed of 25mms should be added to height and width