SEG Fabric Free-Standing Lightbox


+ Delivery and VAT


Our standard SEG Fabric Free-Standing Lightbox comes with:

  • Aluminium frame components
  • LED lights (already attached to the inside of the frame)
  • UK power cable with transformer and fitted plug
  • Allen key
  • 2 × dye-sublimation printed graphics

Our free-standing backlit tension fabric systems consist of an aluminium extrusion frame kit and two SEG fabric tension graphics. The frame is 100mm thick and comes with stabilising feet.

The fabric graphic, are printed using dye-sublimation onto our 310gsm backlit polyester. The dye-sublimation creates great image vibrancy and the graphics are then finished with a silicone edging (kedar). The graphics can then be slotted into the aluminium channel and tensioned around the edge.

The result is a beautifully-finished and seamless branding solution that is perfect for store displays or exhibitions. Replacement graphics are folded and sent via courier in a jiffy bag and are easily replaceable by existing ground staff, negating the need for skilled installers.

Our SEG Fabric Free-Standing Lightboxes are provided with two graphics as standard, due to the Lightboxes being double-sided. You can have the same message both sides or have two different promotional graphics.

The lightboxes are supplies in sections and require some assembly with an allen key (provided).

Each Lightbox graphic is finished with a nylon pull tab as standard. This aids easy removal of the graphic from the frame, which can be tricky without a pull tab. By default, this is affixed to an upper corner of the graphic to prevent children reaching it. Please let us know if you would prefer the pull tab to be located elsewhere or not supplied at all.

Power cable length is approximately 3m.

Please be aware that edge-lit Lightboxes work best with busy, vibrant designs. Plain and single-colour designs can highlight lighting anomalies.

We can also supply premium Lightboxes at bespoke sizes and larger than shown here – please just contact us for a quotation.

Additional information


1m x 2m, 2m x 2m, 3m x 2m


Once you have complete the checkout process, you will be redirected to a page where you can send us your design/design requirements. We will then send you a design proof via email for approval prior to us printing your order. Your order will not be processed until we have approved artwork.

You can give us your artwork in any of these formats: EPS, JPEG, PDF, AI, PSD.

Artwork Size and Resolutions: Artwork can be designed at full size @ 150dpi or half size @ 300 dpi.  

Please bear in mind we print all designs in CMYK, so colour shifts can occur when designs are supplied in RGB format.  

Please convert all fonts to outlines.  

We will match colours as close as possible but some print processes may result in slight colour changes. Colours will not always print exactly as they appear on your computer monitor so please let us know if you have specific colour shades.  

We recommend not placing any critical artwork/text within 5cms of any edge. Bleed of 25mms should be added to height and width